|
|
The Protection System Working on Output of Electronic Sensor System Measuring Current and Voltage
Bajánek, Tomáš ; Jiřičková,, Jana (referee) ; Janíček, František (referee) ; Orságová, Jaroslava (advisor)
At present, there is a widespread use of alternative measurement technologies in electrical networks that include current and voltage sensors. Their use is closely related to the use of IEC 61850-9-2 for data transfer of measured values within the substation for the purpose of protection and measurement. The use of sensors and communication standard IEC 61850 together with high-speed Ethernet will simplify the concept of the arrangement of protection terminals in substations and enable the development of a new protection system based on central protection. The dissertation is focused on protection algorithms, which use the SV according to IEC 61850-9-2, and their implementation into the central protection model. Thesis describes development in the field of protection of substations and the currently available solutions using IEC 61850-9-2 and the principle of central protection. Thesis explains algorithms for selected protection functions - overcurrent protection, negative sequence overcurrent protection, logic busbar protection and differential protection. Further, thesis deals with the programming of protection function algorithms in LabView development environment in the form of a central protection model. The model processes data from a process bus according to IEC 61850-9-2 and sends a GOOSE message over Ethernet in the event of a failure. To verify the correct function of the programmed protection algorithms, a testing procedure was developed using OMICRON 256plus, the current sensor and the merging unit. The results of the testing of the central protection model and the proposed algorithms were compared with the results of testing the currently used protections. At the end, the thesis deals with the assessment of the benefits of central protection for protecting substations and the possibility of further utilization of the central protection model. The thesis highlights a new way of protecting the electrification system using digital data from MU transferred via the process bus described in IEC 61850-9-2.
|
|
|
Systems of protection and remote control of medium voltage substation with using protection with communication Profibus and IEC61850
Tesařík, Jan ; Fazekaš, Tibor (referee) ; Huzlík, Rostislav (advisor)
This Diploma thesis deals with the system for protection and remote control for MV switchgear by using protection relays with communication protocols PROFIBUS and IEC61850. The first part represents a theoretical introduction to points at issue. In the first part, the reader will get conceived with the communication standard IEC61850 and its typical architecture for MV switchgear, and also with data model based on this standard. Second part discusses the PROFIBUS communication protocol. In this part, the reader can acquire information about transmit technology and communication protocol for PROFIBUS. Last part of this theoretical chapter contains an overview on the MODBUS communication. The second part deals with the description of protection relays, which were used for the purposes of this thesis. In the first subchapter, the reader can learn about the REM620 from ABB Company, its configuration and cooperation with IEC61850 standard. Second subchapter describes the HMS Anybus communication converter. The reader will get further knowledge about description of this device and how to configure the communication protocols. In last subchapter, a description of protection relay SIPROTEC 7SJ64 produced by Siemens company is explained. With the third part starts the practical work within this thesis with protection relays. This chapter is divided into two parts; each describes different system with using the protection relays. First system contains ABB REM620 relay and HMS Anybus converter. By converting MODBUS protocol with the Anybus converter, the REM620 can be connected to PROFIBUS network. This part includes the configuration of REM620 and Anybus converter, the engineering of MODBUS and PROFIBUS protocols and testing various signals in those networks. The second system contains Siemens SIPROTEC 7SJ64 and ethernet switch. This subchapter deals with the preparation of configuration for SIPROTEC 7SJ64 and the engineering for IEC61850 communication. This part finishes with the comparing of both systems on the engineering bases. The last part of this thesis is about working with the LabVIEW instrument. Within this part, the software emulation of protection relay was made. The program offers to the user the possibility of setting input parameters as the effective values of current and voltage, the frequency and the current phase shift. Also the user can set the thresholds for protection functions, such as the Overcurrent, the Voltage and the Frequency protection. As last one, the Phase unbalance protection for the current phases is present.
|
|
|
Distance Protection Design Using Digital Input Data
Wannous, Kinan Hasan Wafaa ; Müller,, Zdeněk (referee) ; Braciník, Peter (referee) ; Toman, Petr (advisor)
Standard IEC 61850-9-2 definuje přenos vzorkovaných měřených hodnot (sampled measured values, SMV) prostřednictvím sítě Ethernet a využití SMV získaných ze slučovacích jednotek nebo přístrojových transformátorů. Implementace IEC 61850-9-2 závisí na vlastnostech datového souboru, jakými jsou časová synchronizace, počet vzorků a časový interval. Dizertační práce je zaměřena na algoritmy chránění a analýzu vlivu standardu IEC61850-9-2LE na fyzická zařízení ochran s analogově/digitálními vstupními daty o proudu a napětí. S ohledem na narůstající míru interakce mezi fyzickými zařízeními a komunikačními prvky byl navržen test pro analýzu komunikace pro rozvodnu využívající konvenční metody (analogové vstupy) a metody digitální založené na standardu IEC 61850-9-2. Práce dále popisuje funkci slučovací jednotky využívající standard IEC61850-9-2LE. Navržená metoda definuje zdroj SMV a analyzuje přenos dat. V rámci práce byl za využití softwaru Matlab naprogramován algoritmus ochrany. Vytvořený model je schopen vyhodnotit vliv harmonického zkreslení na funkci digitálních ochran a vliv přesycení proudového transformátoru na distanční ochranu. V práci jsou zhodnoceny i možnosti zrychlení testování systémů chránění s využitím neuronové sítě. Závěrečná kapitola se zabývá aplikacemi v reálném čase, využívajícími data z rozvodny v blízkosti Vysokého učení technického v Brně. K přenosu dat z rozvodny do univerzitní laboratoře je zde využíváno SMV přenášených optickým kabelem o délce 16 km. Aplikace je vytvořena v programu Matlab a je schopna číst data z ethernetového portu, dekódovat je, převést z formátu ASCII do desítkové soustavy a poté vykreslit průběhy proudu a napětí. Mezi vlastnosti aplikace se řadí jednoduchost použití, schopnost implementace funkcí distanční ochrany, výpočet RMS hodnot proudu a napětí a harmonického zkreslení, harmonická analýza prostřednictvím rychlé Fourierovy transformace a výpočet impedance poruchové smyčky. Všechny výpočty běží v reálném čase a provedena je i citlivostní analýza modelu.
|
|
|
Point-on-Wave Controller PWC600 and its capability to protect the HV substation
Šikula, Jiří ; Melnyk, Oleksiy (referee) ; Polsterová, Helena (advisor)
Mechanical and electrical stresses reduce the life of all devices. The lifetime of some devices is affected by these stress factors more, others less. For high voltage products, it's not just a lifetime or a price, but a security that should be the first. This thesis deals with protection of elements of high voltage switchboards. Specifically, it is a PWC600 Point-on-Wave Controller that attempts to minimize stress when connecting or disconnecting loads or generators.
|
|
|
Distance Protection Design Using Digital Input Data
Wannous, Kinan Hasan Wafaa ; Müller,, Zdeněk (referee) ; Braciník, Peter (referee) ; Toman, Petr (advisor)
Standard IEC 61850-9-2 definuje přenos vzorkovaných měřených hodnot (sampled measured values, SMV) prostřednictvím sítě Ethernet a využití SMV získaných ze slučovacích jednotek nebo přístrojových transformátorů. Implementace IEC 61850-9-2 závisí na vlastnostech datového souboru, jakými jsou časová synchronizace, počet vzorků a časový interval. Dizertační práce je zaměřena na algoritmy chránění a analýzu vlivu standardu IEC61850-9-2LE na fyzická zařízení ochran s analogově/digitálními vstupními daty o proudu a napětí. S ohledem na narůstající míru interakce mezi fyzickými zařízeními a komunikačními prvky byl navržen test pro analýzu komunikace pro rozvodnu využívající konvenční metody (analogové vstupy) a metody digitální založené na standardu IEC 61850-9-2. Práce dále popisuje funkci slučovací jednotky využívající standard IEC61850-9-2LE. Navržená metoda definuje zdroj SMV a analyzuje přenos dat. V rámci práce byl za využití softwaru Matlab naprogramován algoritmus ochrany. Vytvořený model je schopen vyhodnotit vliv harmonického zkreslení na funkci digitálních ochran a vliv přesycení proudového transformátoru na distanční ochranu. V práci jsou zhodnoceny i možnosti zrychlení testování systémů chránění s využitím neuronové sítě. Závěrečná kapitola se zabývá aplikacemi v reálném čase, využívajícími data z rozvodny v blízkosti Vysokého učení technického v Brně. K přenosu dat z rozvodny do univerzitní laboratoře je zde využíváno SMV přenášených optickým kabelem o délce 16 km. Aplikace je vytvořena v programu Matlab a je schopna číst data z ethernetového portu, dekódovat je, převést z formátu ASCII do desítkové soustavy a poté vykreslit průběhy proudu a napětí. Mezi vlastnosti aplikace se řadí jednoduchost použití, schopnost implementace funkcí distanční ochrany, výpočet RMS hodnot proudu a napětí a harmonického zkreslení, harmonická analýza prostřednictvím rychlé Fourierovy transformace a výpočet impedance poruchové smyčky. Všechny výpočty běží v reálném čase a provedena je i citlivostní analýza modelu.
|
|
|
Point-on-Wave Controller PWC600 and its capability to protect the HV substation
Šikula, Jiří ; Melnyk, Oleksiy (referee) ; Polsterová, Helena (advisor)
Mechanical and electrical stresses reduce the life of all devices. The lifetime of some devices is affected by these stress factors more, others less. For high voltage products, it's not just a lifetime or a price, but a security that should be the first. This thesis deals with protection of elements of high voltage switchboards. Specifically, it is a PWC600 Point-on-Wave Controller that attempts to minimize stress when connecting or disconnecting loads or generators.
|
|
|
The Protection System Working on Output of Electronic Sensor System Measuring Current and Voltage
Bajánek, Tomáš ; Jiřičková,, Jana (referee) ; Janíček, František (referee) ; Orságová, Jaroslava (advisor)
At present, there is a widespread use of alternative measurement technologies in electrical networks that include current and voltage sensors. Their use is closely related to the use of IEC 61850-9-2 for data transfer of measured values within the substation for the purpose of protection and measurement. The use of sensors and communication standard IEC 61850 together with high-speed Ethernet will simplify the concept of the arrangement of protection terminals in substations and enable the development of a new protection system based on central protection. The dissertation is focused on protection algorithms, which use the SV according to IEC 61850-9-2, and their implementation into the central protection model. Thesis describes development in the field of protection of substations and the currently available solutions using IEC 61850-9-2 and the principle of central protection. Thesis explains algorithms for selected protection functions - overcurrent protection, negative sequence overcurrent protection, logic busbar protection and differential protection. Further, thesis deals with the programming of protection function algorithms in LabView development environment in the form of a central protection model. The model processes data from a process bus according to IEC 61850-9-2 and sends a GOOSE message over Ethernet in the event of a failure. To verify the correct function of the programmed protection algorithms, a testing procedure was developed using OMICRON 256plus, the current sensor and the merging unit. The results of the testing of the central protection model and the proposed algorithms were compared with the results of testing the currently used protections. At the end, the thesis deals with the assessment of the benefits of central protection for protecting substations and the possibility of further utilization of the central protection model. The thesis highlights a new way of protecting the electrification system using digital data from MU transferred via the process bus described in IEC 61850-9-2.
|
|
|
Systems of protection and remote control of medium voltage substation with using protection with communication Profibus and IEC61850
Tesařík, Jan ; Fazekaš, Tibor (referee) ; Huzlík, Rostislav (advisor)
This Diploma thesis deals with the system for protection and remote control for MV switchgear by using protection relays with communication protocols PROFIBUS and IEC61850. The first part represents a theoretical introduction to points at issue. In the first part, the reader will get conceived with the communication standard IEC61850 and its typical architecture for MV switchgear, and also with data model based on this standard. Second part discusses the PROFIBUS communication protocol. In this part, the reader can acquire information about transmit technology and communication protocol for PROFIBUS. Last part of this theoretical chapter contains an overview on the MODBUS communication. The second part deals with the description of protection relays, which were used for the purposes of this thesis. In the first subchapter, the reader can learn about the REM620 from ABB Company, its configuration and cooperation with IEC61850 standard. Second subchapter describes the HMS Anybus communication converter. The reader will get further knowledge about description of this device and how to configure the communication protocols. In last subchapter, a description of protection relay SIPROTEC 7SJ64 produced by Siemens company is explained. With the third part starts the practical work within this thesis with protection relays. This chapter is divided into two parts; each describes different system with using the protection relays. First system contains ABB REM620 relay and HMS Anybus converter. By converting MODBUS protocol with the Anybus converter, the REM620 can be connected to PROFIBUS network. This part includes the configuration of REM620 and Anybus converter, the engineering of MODBUS and PROFIBUS protocols and testing various signals in those networks. The second system contains Siemens SIPROTEC 7SJ64 and ethernet switch. This subchapter deals with the preparation of configuration for SIPROTEC 7SJ64 and the engineering for IEC61850 communication. This part finishes with the comparing of both systems on the engineering bases. The last part of this thesis is about working with the LabVIEW instrument. Within this part, the software emulation of protection relay was made. The program offers to the user the possibility of setting input parameters as the effective values of current and voltage, the frequency and the current phase shift. Also the user can set the thresholds for protection functions, such as the Overcurrent, the Voltage and the Frequency protection. As last one, the Phase unbalance protection for the current phases is present.
|
guest ::
